Sliding And Tilting Glass Sunroof Assembly Overview

Sliding And Tilting Glass Sunroof

Assembly overview







1 - Glass sunroof panel
2 - Gasket
- Gasket joint centered in right side area
- Treat sealing channel with lubrication (water) before installation

3 - Trim
4 - Sun shade
5 - Assembly
- If necessary, guide channels can be greased exclusively with G 000 450 02

6 - Allen wrench for emergency operation
- Clipped onto electrical drive

7 - Countersunk screws
- Always replace
- 3 Nm (27 in.lb)

8 - Phillips screw
9 - Electrical drive
- Checking

10 - Wind deflector
- Slide glass panel back, unscrew wind deflector and detach at left and right sides

11 - Velcro strip
- Glued on trim and glass panel frame

12 - Phillips screw
- 5 Nm (44 in.lb)

13 - Lock washer
- With centering pin