Rear Seats

Rear Bench Seat, Removing







- Remove front hex bolts - 1 -.
- Unlock seat back and fold forward.
- Unlock seat base, tip forward (hex bolts will be visible).
- Remove rear hex bolts - 2 -.
- Remove seat bench from vehicle.
- Tightening torque:
- Hex bolts - 1 -, - 2 - = 35 Nm (26 ft lb)

Rear bench seat (double cab), removing







- Unlatch seat cushion with locking lever - 1 -, lift up.
- Pull seat cushion - 2 - forward to stop (arrow).







- Lift seat cushion on one side (left) until guide pins - 1 - can be slid into upper slot (arrow) (in the process, seat cushions will be pushed to outside of vehicle).
- Lift opposite side of seat cushion out of seat bracket slot, pull seat cushion diagonally out of bracket.







- Remove Phillips screws - 1 -, back cushion - 2 - on seat frame and remove from vehicle.







- Remove four hex bolts - 1 - from cab floor, remove nuts - 2 - from cab rear panel.
- Remove seat box from vehicle.

Tightening torques:
Hex bolts - 1 - = 22 Nm (16 ft lb)
Nuts - 2 - = 10 Nm (7 ft lb)