Diagram By Track Number

Seat Belt Warning System - Track 1-14:

COMPONENTS
J285 - Control module with indicator unit in instrument panel insert
F2 - Door contact Switch-Driver's side
D - Ignition/Starter Switch
E24 - Left Seat Belt Switch
R - Radio
J152 - Radio/Parking Light Warning Buzzer
J34 - Seat Belt Warning System Relay, above fuse/relay panel
K19 - Seat Belt Warning Light

CONNECTORS
TV4 - Terminal 15 Wire Connector, above fuse/relay panel
T1a - Single Connector, behind fuse/relay panel
T1b - Single Connector, behind fuse/relay panel
T1c - Single Connector, behind fuse/relay panel
T1f - Single Connector, behind fuse/relay panel
T1y - Single Connector, behind fuse/relay panel
T2 - Double Connector, on Seat Belt Switch
T2a - Double Connector, behind fuse/relay panel
T8 - 8-Pin Connector, on Radio
T28 - 28-Pin Connector

GROUND CONNECTIONS

NOTE: Grounds connections are indicated on the diagram by a numeric code inside a circle
30 - Ground connection, -1-, next to fuse/relay panel

HARNESS SPLICES

NOTE: Harness splices are points inside a wiring harness where two or more wires are crimped and/or soldered together. Harness splices are indicated on the diagrams by an alphanumeric code inside a circle
A78 - Connector (SU), in instrument panel wiring harness
R4 - Wire connection -1-, in interior light/door contact switch wiring harness