Mechanical Specifications

Tightening Specifications
Checking Fluid Level
Differential Check/Filler Plug 20 Nm (15 ft lb)

Replacing Seals
Wheel Bearing Hsg To Lower Ball Joint 55 Nm (41 ft lb) + 90° (1/4 turn)

NOTE: Always Replace Bolt

Shock Absorber To Axle Link 160 Nm (118 ft lb)
Hex Bolt To Drive Shaft 150 Nm (111 ft lb) + 90° (1/4 turn)

NOTE: Always Replace Bolt

Bonded Rubber Mounting To Subframe 200 Nm (148 ft lb)
Wheel Bolts To Wheel Hub 160 Nm (118 ft lb)
Drive Shaft To Drive Flange 70 Nm (52 ft lb)

Final Drive and Differential Servicing
Extension Bearing Housing Bolt 40 Nm (30 ft lb) + 90° (1/4 turn)
Torque Converter Hsg. To Trans Hsg. Nut 25 Nm (18 ft lb)
Torque Converter Hsg. To Trans Hsg. Bolt 25 Nm (18 ft lb)
Socket Head Retainer For Input Gear 250 Nm (184 ft lb)
Pinion Bearing Retainer Lock Screw 12 Nm (9 ft lb)
Pinion Shaft Nut 250 Nm (184 ft lb)
Bearing Cap Retaining Bolt 25 Nm (18 ft lb)
Pinion Bearing Retaining Ring 200 Nm (148 ft lb)
Ring Gear To Carrier Bolt 80 Nm (59 ft lb) + 90° (1/4 turn)