C-Pillar Trim

Lower C-pillar Trim, Removing And Installing

Removing

NOTE: The illustrations cover only one side of vehicle, the other side of vehicle is the mirror image.

- Disengage backrest for rear seatbench and push forward.







- Loosen hex nut - 2 - and remove lock bolt - 3 -.
- Pull upholstery - 1 - in upper area out of clip - 4 -, press lower tab - 6 - to rear from sill panel - 7 - and remove upward with tab - 5 -.







- Remove bolts - 1 -.
- Remove trim - 2 - from clip - 3 - and from C-pillar.

Installing
Installation is performed in the reverse order of removal.

NOTE: After installing trim, make sure that door seal is properly seated.