Parallel Movement, Adjusting

Parallel Movement, Adjusting

NOTE: Parallel movement adjustment can only be performed with drive motor removed and glass panel (in "0" position).

- Removing drive motor for sunroof.

Marking - arrow - on upper part of rear guide - 1 - must be located on both sides between markings dimension - a - at slotted guide rail - 2 -.

Slotted guide rail - 2 - must be engaged in guide rail (cannot be moved by hand).

- Slide upper part of guide - 1 - only from front toward rear center, between markings.
- Install drive motor ("0" position) in this position.







Check "0" position.