Rear Backrest (Two Pieces), Removing and Installing
Rear Backrest (Two Pieces), Removing And Installing
Removing
Vehicles without center three-point seatbelt
- Push rear backrests forward.
- Remove bolt - 1 - from backrest mount - 3 - (8 Nm) and remove clamp - 2 -.
- Remove right backrest upward out of backrest mount - arrow A - and remove from pin - 4 - - arrow B -.
- Remove left backrest upward out of backrest mount - arrow C - and remove from pin - 5 - - arrow D -.
Vehicles with center three-point seatbelt
- Remove seatbench.
- Remove bolt - 1 - (40 Nm) and remove belt end fitting from seatbelt - 2 -.
- Push rear backrests forward.
- Remove bolt - 1 - from backrest mount - 3 - (8 Nm) and remove clamp - 2 -.
- Remove right backrest upward out of backrest mount - arrow A - and remove from pin - 4 - - arrow B -.
- Remove left backrest upward out of backrest mount - arrow C - and remove from pin - 5 - - arrow D -.
Installing
Installation is performed in the reverse order of removal.