Multi-Pin Connectors, Terminal Assignment

Multi-pin connectors, terminal assignment

Note: All terminals not listed are currently not assigned and must never be connected to other components!





ABS control module -J104- connector -T25-





Data link connector (DLC) for voltage supply and On Board Diagnostic (OBD) with the VAG 1551 scan tool
Terminal 4 = Ground (terminal 31)
Terminal 16 = Battery positive voltage (B+) (terminal 30) via -S21-
Terminal 7 = K-wire via junction in instrument panel wiring harness (A76) to ABS control module -J104- contact 11

Part 1 Of 2:

Part 2 Of 2:

Wiring connection to component





Test step overview