Center Seat Belt, Assembly Overview

Assembly and Removal




1 - Belt retractor
2 - Belt
3 - Belt guide
4 - Bolt
- 40 Nm (30 ft lb)
5 - Belt guide
6 - Cover
7 - Seat belt carrier (bracket)
- This is the only bolted on rigid backrest version, on all other carrier versions are welded to seat backrest
8 - Threaded plate
- Only with rigid backrest, all other versions have threaded stud
9 - Screws
- Only with rigid backrest
- 40 Nm (30 ft lb)
10 - Padding
11 - Nut
- Not with rigid backrest
12 - Bolt
- Only with rigid backrest
- 40 Nm (30 ft lb)

Belt Retractor, Removing




- Remove seat backrest
- Pry off cover cap -1- from seat belt guide -2-.
- Remove seat belt anchorage -3-.
- Unclip seat belt guide -2- and remove from seat belt -4-.
- Remove head restraint guides
- Release cover and padding for seat backrest




- Remove bolt -1- 40 Nm (30 ft lb) and take seat belt relay -2-off carrier -3-.
- Remove nut -5- (or bolt on rigid backrest) 40 Nm (30 ft lb) and unhook seat belt retractor -4- from carrier -3-.




- Guide seat belt with seat belt relay out from carrier-3- downward.

NOTE: Belt retractor must be held in installation position to unreel seat belt.