Front Final Drive, Servicing

Front Final Drive, Servicing
Transmission in vehicle





1. Seal
^ Between front final drive and transmission housing
2. Shim
^ Behind tapered roller bearing outer race
3. Tapered roller bearing outer race O-ring
^ Always replace
5. Sealing plug
^ 30 Nm (22 ft. lbs.)
6. Bolt
^ 23 Nm (17 ft. lbs.)
7. Right-hand drive flange
8. Seal for right-hand drive flange
9. Bolt
^ 23 Nm (17 ft. lbs.)
^ Follow correct tightening sequence
10. Cover for front final drive
11. Shim
^ Behind tapered roller bearing outer race
12. Tapered roller bearing outer race
13. O-ring
^ Always replace
14. Differential
15. Torsen differential (PAT)
^ Replace complete unit if damaged
16. Gasket
17. Filler plug
^ Always replace
^ 35 Nm (26 ft. lbs.)
18. Bolt
^ 23 Nm (17 ft. lbs.)
^ Observe tightening sequence
19. Transfer gearbox
20. Drain plug
^ 20 Nm (15 ft. lbs.)
21. Bolt
^ 23 Nm (17 ft. lbs.)
^ Observe tightening sequence
22. Dowel pin
^ Qty.: 2
23. Intermediate flange for front final drive
24. Dowel sleeve
25. Gasket
26. Spring pin
27. Lever
^ For selector shaft
28. Seal
^ For selector shaft
29. Bolt
^ 23 Nm (17 ft. lbs.)
30. Seal for left-hand drive flange
^ Replacing
31. Impulse wheel
^ For speedometer Vehicle Speed Sensor (VSS) -G22-
32. Left-hand drive flange
^ Removing and installing
33. Bearing bracket for drive flange
34. Grooved ball bearing for drive flange
^ Replacing
35. Circlip
36. O-ring
^ Square section
^ Remove and install left-hand drive flange to replace O-ring