Timing Component Alignment Marks: Locations

Caution: Incorrect removal or installation of the timing belt can result in damage to internal engine components.

Timing Component Alignment Marks

Camshaft Drive Belt Alignment Marks:

Check that the "OT" mark on camshaft sprocket aligns with "OT" mark on rear cover.




Check that the crankshaft is at TDC.

Marking For Cylinder No.1 On Ignition Distributor Housing:

Check that the distributor is pointing to #1 cylinder.

CAUTION! DO NOT turn camshaft with timing belt removed! If pistons are at Top Dead Center (TDC) there is a danger of damaging valves and piston crowns.


For complete Timing Belt Removal and Installation information: Service and Repair