Camber, Adjusting

Special Tools and Equipment





^ 3252 box wrench (40 mm)





^ VAG1332 torque wrench

^ If necessary, remove right protective panel for horn.





^ Loosen bolt -A-.

Notes:
^ For loosening and tightening with the wheel installed, turn steering if necessary.
^ For the sake of illustration, the figure shows the threaded connection without the wheel.
^ Loosen nut -b-.





^ Modify 3252 box wrench (46 mm) as shown in illustration
Dimension a = 30 mm
^ Mark 3252 box wrench (46 mm) with the letter -A-.





^ Adjust eccentric socket until the specified value has been reached using 3252A special tool.





^ Re-tighten nut -b-.
^ Re-tighten bolt -a-, if necessary remove wheel to do so.

Tightening torques:
Bolt -a- 60 Nm
Nut -b- 110 Nm