Replacement of ECM & Control Module For Immobilizer Adaptation

Replacement Of Engine Control Module (ECM) And Control Module For Anti-theft Immobilizer -J362-, Adaptation (function 10)

If all components are to be replaced, adapt all control modules and use new key set.

Appropriate control modules must be obtained from the parts department based on the Vehicle Identification Number (VIN) and engine code.

Appropriate ignition keys must be obtained from the parts department based on the key number.

- Install new components.
- Before adapting components, the VIN must be input in to the control module for immobilizer. This is only possible with the VAS 5051 tester.
- Adapt Engine Control Module (ECM).
- Adapt all ignition keys.