Part 3

Legend
1 Bolt 10 Nm (7 ft lb)
8 Bolt: 10 Nm (7 ft lb)
- Install with D6 locking fluid
10 Bolt 20 Nm (15 ft lb)
- Tightening torque influences knock sensor function
17 Bolt 25 Nm (18 ft lb)
18 Bolt 10 Nm (7 ft lb)
- Always replace
- Install with D6 locking fluid
20 Oil drain plug 30 Nm (22 ft lb)
21 Bolt 15 Nm (11 ft lb)
- Remove and install using 3249 socket
- With flywheel installed: turn flywheel until recess aligns with bolts
23 Oil cooler cover 25 Nm (18 ft lb)
28 Bolt 120 Nm (89 ft lb) + 1/4 turn (90°) further
- Always replace
- Counter-hold using 3406 to loosen and tighten refer to Fig. 1 below.
30 Bolt 20 Nm (15 ft lb)
32 Bolt 25 Nm (18 ft lb)
- Loosening and tightening: counterhold using a punch fed through the holes
33 Bolt 55 Nm (41 ft lb)