Engine Control Module: Application and ID

Control Module Identification and Equipment

Control Module Identification
The control module version is displayed when the VAG1551 Scan Tool (ST), the VAG1552 mobile scan tool or the VAS5051 vehicle diagnostic, testing and information system is connected and "Engine Electronics" address word 01 is selected [1][2][3]Connecting VAG 1551 Scan Tool

Technical data

Engine code AFP
System designation Motronic ME7.1
Exhaust emissions conform to: OBD II
On Board Diagnostic (OBD) yes
Output Diagnostic Test Mode yes
Operating mode of data transfer to VAG1551/1552 Rapid data transfer
DTC memory Non-volatile memory 1)
Readiness Code Memory Volatile memory 2)
Heated Oxygen Sensors (HO2S) 2 sensors
Knock control 2 knock sensors
Twin-path intake manifold yes
Variable valve timing no
Charge pressure control no
Secondary Air Injection (AIR) system yes

1) Independent of voltage supply.
2) Values are erased when voltage supply is interrupted.