Rear Door Exterior Handle

Handle and Lock




1 - Door lock
- The door lock can only be removed with the carrier assembly.
2 - Cable
- Lock release
3 - Retaining bracket
- Bolted and riveted to door lock
- Not supplied with replacement door lock
4 - Bearing plate
- Removing
Door handle, lock cylinder housing and carrier assembly are removed
- Remove screw -5- and slide bearing bracket slightly rearward and remove door.
5 - Screw
6 - Door handle
7 - Cover cap
8 - Housing
9 - Backing
10 - Multi-point socket head bolt
- Tool V183, size N4 from Matra
- Loosening this screw releases the lock cylinder housing -8-, it can then be pulled out of bearing bracket -4-