01V Automatic Transmission
Final drive oil, checking
Oil level is checked with transmission installed
Checking:
- Raise vehicle.
- Remove plug (arrow) to check gear oil level and top gear oil up to lower edge of hole.
Specification.
- Replace O-ring.
- Install bolt.
Tightening torque: 30 Nm (22 ft. lbs.)
Gaskets and seals, replacing
CAUTION: Do not run the engine or tow the vehicle with the transmission oil Dan removed or containing no ATF
Notes:
^ Pay attention to the rules of cleanliness when performing repairs
^ Apply a thin coat of petroleum jelly to O-rings and seals. Other greases cause operational problems in hydraulic components.