Installation Unit, Removing and Installing

Installation Unit, Removing And Installing







Removing
- Removing automatic rotary switch for sunroof.
- Removing molded headliner.
- Disconnect water drain hoses from installation unit - 1 - - arrows -.
- Remove bolts - 2 - and - 4 - (with sleeves) and remove installation unit from vehicle with a second mechanic.

Installing
- Insert installation unit - 1 -, align according to bolt bores and insert bolts - 2 - and - 4 - (with sleeves).
- Check and establish if necessary correct routing of wires and connectors for electrical consumers at roof.
- Secure (8 Nm) installation unit - 1 - of drive motor for sunroof - 3 - beginning at left and right toward rear.
- Install water drain hoses - arrows -.
- Connect connector for drive motor - 3 -.