With Manufacturer Scan Tool

Check DTC Memory


NOTE: The displayed DTC information is updated only when initiating OBD or with "Erase DTC Memory" function 05.


- Switch printer on via the PRINT button (indicator lamp in button lights up).


Indicated on display:


Rapid data transfer HELP
Select function XX

- Press buttons -0- and -2-. This selects "Check DTC memory", function 02.


Indicated on display:


Rapid data transfer Q
02 - Check DTC Memory


- Press -Q- button to confirm input.


Display indicates the number of stored malfunctions.


X malfunctions recognized!


The stored malfunctions are displayed and printed out in sequence.

- Check print-out against DTC table and repair malfunction. Immobilizer System


If "No DTC recognized!" is displayed, the program will return to "Select function XX" after the -> button is pressed.


No malfunction recognized! ->


Indicated on display:


Rapid data transfer HELP
Select function XX

If something else is displayed:
See Operating instructions for Scan Tool (ST)
- End Output (function 06). End Output (Function 06)
- Switch off ignition and disconnect diagnostic connector.