Drive For Sliding/Tilting Sunroof, Adjusting ("0" Position)

Drive For Sliding/tilting Sunroof, Adjusting ("0" Position)

There may be a requirement to adjust the "0" position if the drive was removed when not in "0" position or the sliding/tilting sunroof was closed using the emergency key.

Drive removed but still connected electrically.
- Select "tilt roof" with preselection control rotary switch.
- Select "closed roof" with preselection control rotary switch.
- Select "open roof" with preselection control rotary switch.
- Select "close roof" with preselection control rotary switch.
- Install drive in this position ("0" position) with sliding/tilting roof closed.