Reading

Read Measured Value Block

Special tools and equipment

VAG 1551 Scan Tool with cable VAG 1551/3
- Connecting Scan Tool. Scan Tool Connecting and Initial Checks
- Initiating On Board Diagnostic (OBD). Scan Tool Connecting and Initial Checks

The measured values in the functions Read Measured Value Block and Basic Setting are described during the individual component test. This table serves only as an overview.

The measured value block is divided into 6 display group numbers. The assignment of the individual display groups can be taken from the display group overview.

Indicated on display


Rapid data transfer HELP
Select function XX


- Press keys -0- and -8- (08 initiates the "Read Measured Value Block" function).

Indicated on display


Rapid data transfer Q
08 - Read Measured Value Block


- Confirm with -Q- key.

Indicated on display


Read Measured Value Block HELP
Input display group number XXX


NOTE: The display group number 001 is an example to illustrate the sequence.


- Press keys 0, 0 and 1 for "display group number 1" and confirm entry with -Q- key.

Indicated on display (1-4 = display fields)


Read Measured Value Block 1 ->
1 2 3 4


NOTE:
To change to another display group proceed as follows:







- Displayed after pressing -C- key.


Indicated on display


Read Measured Value Block HELP
Input display group number XXX


- Now enter the display group number required.