Drivers Side/Passengers Side Head-Level Airbag (Recaro Seat), Removing and Installing

Drivers Side/passengers Side Head-level Airbag (Recaro Seat), Removing And Installing

NOTE: Removal and installation is described for right side of vehicle. The same instructions apply for removal and installation for the left-hand side.

Removing

CAUTION: Observe safety precautions for working on airbags.

- Remove Recaro seat.
- Remove trim, backrest mounting bracket.
- Remove seat side trim on door sill side.







- Disconnect wiring harness - 5 - from seat frame.
- Remove bolt - 4 - from tab - 6 - and backrest - 1 - (10 Nm).
- Press side-airbag - 2 - downward as far as it will go.
- Pull side airbag toward outside, side airbag engaging pins - 3 - are pulled out of holes - 7 -.

Installing
- Installation is the reverse order of removal.
- Switch ignition on.

CAUTION: Make sure no one is in the vehicle.

- Connect vehicle battery.