Preparing New Window For Glazing
Preparing New Window For Glazing
Preparing new windshield and rear window for glazing
New windows are shipped pre-coated with -PUR-. Pre-coating consists of positions - 1 -, - 2 - and - 3 -.
1. Sealing lip
2. Spacer
3. Application are for adhesive bead
4. Washer
- Rub pre-coating with a dry, lint-free rag.
CAUTION: Do not prime or use a cleaning solution on pre-coating.
- Using Applicator D 009 500 25 - 4 - (felt ball with wire), apply Activator D 181 801 A1 thinly onto pre-coating - 5 - only.
- Allow Cleaning solution D 009 401 04 to air dry for at least 10 minutes.
CAUTION: Activator D 181 801 A1 must not come into contact with paint - otherwise paint will be damaged.
Preparing new side window for glazing
- Clean window edge all around to 30 mm width using Cleaning solution D 009 401 04 and rub dry using lint-free cloth.
CAUTION: Ceramic application on window is not primer! It must be primed before application of adhesive sealing material! Only use primer D 009 200 02
- Now apply Primer D 009 200 02 - 2 - using Applicator D 009 500 25 - 3 - evenly in one stroke on previously cleaned area of window - 1 -.
- Air dry time approx. 10 minutes