Programming and Relearning

Cruise Control System - 1.8L Turbo, 2.0L (Codes AVH & AZG) and 2.8L VR6, Activating

If a Motronic Engine Control Module (ECM) has been replaced, it may be necessary to activate the cruise control function in the new ECM. Activate/deactivate system using the following procedure:
- Connect VAG 1551/1552 Scan Tool.
- Switch on ignition
- Press buttons 0 and 1 to select Address word 01: "Engine electronics".

Display (example only)


021906018B Motronic ME7.1 G V06 ->
Coding 00000 WSC XXXXX


- Press -> button.

Display will appear as shown


Rapid data transfer HELP
Select function XX


- Press buttons 1 and 1 to select function 11 "Login procedure"

Display will appear as shown


Rapid data transfer Q
11 - Login procedure


- Press Q button to enter input.

Display will appear as shown


Login procedure
Input Code Number XXXXX


- To activate or deactivate cruise control system, use scan tool key pad to enter appropriate value from table below:







- Press Q button to enter input.
- End output (function 06) and perform test drive to confirm cruise control functions.