Front Bumper Cover / Fascia: Locations

Bumper cover, assembly overview

Note: Slight changes may have to be made to removal and installation procedures, depending upon equipment installed in vehicle.






1. Bumper cover
Material - PP/EPDM
Removing, refer to Bumper cover, removing and installing Service and Repair

2. Bolt
Qty. 7
6.6 Nm

3. Guide piece
To remove and install, pull out/slide in bumper cover parallel out of guide pieces (left and right sides).

4. Wheelhousing liner

5. Screw
Qty. 8 for common models Golf/Jetta
1.5 Nm
Qty. 10 for Jetta GLI Sport

6. Speed nut
Qty. 8 for common models Golf/Jetta
Qty. 10 for Jetta GLI Sport

7. Cover for headlight cleaning system
Cover is part of headlight cleaning system
For special models

8. Spoiler
For common models Golf/Jetta: clipped in on bumper cover
For Jetta GLI Sport: delivered as by-pack

9. Air guide grille, left
Clipped in on bumper cover

10. Air guide grille, center
Clipped in on bumper cover

11. Air guide grille, right
Clipped in on bumper cover