Lumbar Support, Removing and Installing
Lumbar Support, Removing And Installing
NOTE: lumbar support allows backrest adjustment in area of lumbar vertebra.
Removing
- Remove headrest guides.
- Remove seat.
- Remove backrest.
- Unclip trim on rear side at bottom and unhook upward.
- Separate beading strip - 1 - for cover - 2 - using a screwdriver - arrows -.
- Unhook tension wire - 1 - - arrows -.
- Remove adjusting knob - 1 -.
- Slide cover - 1 - up and remove bolts - 4 - for lumbar adjustment - 2 -.
- Remove lumbar adjustment - 2 - from backrest frame - 3 -.
- Unclip lumbar support - 1 - - arrows - and remove from backrest frame.
Installing
Installation is reverse of removal.