A/C Control Head With Climatronic Control Module Remove/Install
CAUTION!
Before beginning repairs on the electrical system:
- Obtain the anti-theft radio security code.
- Switch the ignition off.
- Disconnect the battery Ground (GND) strap.
- After reconnecting battery, re-code and check operation of anti-theft radio. Also check operation of clock and power windows.
NOTE: Climatronic Control Module -J255- and A/C Control Head -E87- are integrated into a single unit that cannot be serviced separately.
Removing
- Using a screwdriver with a protected tip carefully unclip control head trim at locations indicated by -arrows-.
- Remove instrument panel screws -arrows-.
- Pull out A/C control head.
- Disconnect electrical connectors.
- Remove A/C control head with control module.
Installing
Code control module, function 07, and then initiate Basic setting, function 04 See Climatronic, OBD.