Fuel Supply System Components Removing and Installing Notes

NOTE:
- Production hose connections are secured with either spring or clamp type clips.
- When replacing an existing clip, always use the spring-type.
- Only secure fuel hoses in engine compartment with spring-type clips. The use of clamp or screw type clips is not permitted.
- V.A.G 1921 or VAS 5024 pliers are recommended for installing spring clips.


Observe safety precautions.
Observe rules of cleanliness.
Fuel tank component assembly, removing and installing.
Throttle mechanism, servicing.
Throttle cable, adjusting (only engine code AEG).
Evaporative emissions system, servicing.