With Manufacturer Scan Tool

Diagnostic Trouble Code (DTC) Memory, Erasing (Function 05)


NOTE: After erasing the DTC memory its contents will automatically be indicated. If the DTC memory cannot be erased, again check DTC memory and repair malfunctions.


Requirements

- DTC memory checked.
- All malfunctions repaired.

After Diagnostic Trouble Code (DTC) memory has been successfully checked:

Indicated on display:


Rapid data transfer HELP
Select function XX


- Press keys 0 and 5. (05 selects the "Erase DTC memory" function.)

Indicated on display:


Rapid data transfer Q
05 Erase DTC memory


- Confirm entry with key Q.

Indicated on display:


Rapid data transfer ->
DTC memory Is erased!


The DTC memory is now erased.

- Press -> key.

Indicated on display:


Rapid data transfer HELP
Select function XX


NOTE:
- If this appears in the display, the test sequence is faulty.


Warning!
DTC memory was not checked


- If this appears in the display, the test sequence is faulty.
- Adhere exactly to test sequence: First check DTC memory, if necessary repair malfunctions, then erase.


Rapid data transfer ->
DTC memory was not checked

End Output (Function 06)

- Press buttons -0- and -6- to select function "End output".

Indicated on display:


Rapid data transfer Q
06 End output


- Press -Q- button to confirm input.

Indicated on display:


Rapid data transfer HELP
Enter address word XX


- Switch off ignition.
- Disconnect VAG 1551 Scan Tool (ST).