Test Step 17

Test steps 17














- If the measured figures only deviate slightly from the specifications, clean sockets and plugs of the testers and adapter cables (with contact spray G 000 700 04 ) and repeat check. Before replacing components, check wiring and connections and also, particularly for specifications of less than 10 ohms, repeat resistance check on the component.

- If the measured figures only deviate slightly from the specifications, clean sockets and plugs of the testers and adapter cables (with contact spray G 000 700 04 ) and repeat check. Before replacing components, check wiring and connections and also, particularly for specifications of less than 10 ohms, repeat resistance check on the component.