Shift Lever Knob and Cover, Removing and Installing

Shift lever knob and cover, removing and installing
1 - Shift lever knob
^ Remove and install together with cover
2 - Cover
^ Separating from shift lever knob, Refer to Fig. 1
^ Connect to shift lever knob before installing, Refer to Fig. 1
^ Remove and install together with shift lever knob
3 - Sleeve
4 - Clamp
^ To secure shift lever knob on gear stick
^ Secure on shift lever knob -item 1- using pliers VAG 1275
5 - Frame
6 - Sound insulation





Fig. 1 Shift lever cover, separating and assembling to shift lever knob
^ Turn cover inside out.
^ Carefully pry clamping sleeve (arrow) off with a screwdriver and pull shift lever knob out.

Installation is carried out in the reverse sequence. When installing note the following:
^ Insert shift lever knob in cover.
^ Push clamping sleeve onto shift lever knob and engage.
^ Install shift lever knob and cover together.