Rear

Toe on rear axle, adjusting

Special tools and equipment
^ VAG 1332 Torque wrench
If a value lies outside the allowed tolerances, the vehicle's transverse inclination must be checked and compensated.
The total toe for the rear axle is not adjustable.
Only by moving the mounting bracket is it possible to adjust the individual toe equally.
If the measured values lie outside the allowed tolerances, the axle body must be checked for damage and if necessary replaced.
- Loosen all bolts on bearing bracket -1-.





- Move bearing bracket -1- laterally -arrows-.
2. Rear axle beam
- Tighten bolts to 30 Nm (22.1 ft. lbs.) plus additional 90° turn.
- Always use new bolts!