Code Control Module (Function 07)
Code Control Module (Function 07)
Use this function to code the Multi-function Steering Wheel (MSW) electronics.
Coding
- Connect VAG 1551 Scan Tool (ST), input address word 16 "Steering wheel electronics"
Indicated on display (example only):
1J0907487 Steering wheel electron.x28 ->
Coding 00008 WSC 00000
NOTE: Control module coding depends on the part number of the control module installed. Make note of the control module part number when displayed by the Scan Tool.
- Press -> button
Indicated on display (select function):
Rapid data transfer HELP
Select function XX
- Press buttons -0- and -7- to select "Code control module" function 07".
- Press -Q- button to confirm input.
- Indicated on display:
- Refer to control module part number noted earlier, and check/enter applicable code number from code tables.
Code tables
Control modules without index, and with index B
Example: 1J0 907 XXX_ or 1J0 907 XXX B
Code number Designation
00008 Radio & cruise control system (CCS)
Control modules with index A
Example: 1J0 907 XXX A
Code number Designation
00118 Radio & cruise control system (CCS)
- Indicated on display (example only):
- Press -Q- button to confirm input.
Indicated on display (select function):
Rapid data transfer HELP
Select function XX
Check DTC memory after coding, and erase any DTCs stored. Diagnostic Trouble Code (DTC) Memory, Checking (Function 02)
- End Output (function 06). End Output (Function 06)