Seat and Mirror Settings For Normal Driving, Storing

Seat And Mirror Settings For Normal Driving, Storing

- Switch on ignition.
- Set the seat.
- Set both exterior mirrors.







- Now press one of the memory buttons (1-3) and hold it depressed for about 3 seconds until an acoustic signal confirms that the settings are stored in the memory.

The settings are now stored on the selected memory button.

The stored settings can be recalled via the memory buttons (1-3) as well as via the radio frequency remote control.

Allocating a seat adjustment to a radio frequency remote control key is described at the end.

NOTE:
- When the vehicle battery is disconnected all the data stored for the seat and mirror settings are lost.
- For future versions of the control module this data will be retained even when the battery is disconnected.
- Each time settings are stored on a button the previous data will be erased.