Door Handle And Door Lock , Assembly Overview

Door Handle And Door Lock , Assembly Overview







1 - Door lock
- Door lock can only be removed in conjunction with assembly carrier.
- Cover - 4 - was introduced as a running change in production for lock. It is clipped onto lock and must be installed again or retrofitted when replacing door lock..

2 - Cable
- Lock release

3 - Retaining bracket
- Bolted and riveted to door lock.
- Does not belong to door lock delivery casing.

4 - Cover
- Does not belong to door lock delivery casing.
- Must be re-installed or retrofitted when replacing door lock.
- Retrofit for all vehicles --> 09.99.

5 - Mounting bracket
- Removing: Door handle, lock cylinder housing and assembly carrier have been removed.
- Remove bolt - 6 -, slide mounting bracket slightly to rear and remove from door.

6 - Screw
- 4.5 Nm

7 - Door handle with backing plate
8 - Key
- With radio-frequency remote control (non-foldable).
- Changing battery.

9 - Key
- With radio-frequency remote control (foldable).
- Changing battery -->07.00.
- Changing battery 08.00 -->.
- Adapting new/additional keys to remote control.

10 - Concealment cap
11 - Lock cylinder housing
- Lock cylinder is not available as an individual replacement part.

12 - Base plate
13 - Bolt
- Socket wrench T 10011
- Socket wrench T 10072
- By loosening this bolt, locking mechanism for lock cylinder housing - 11 - is removed and may be removed from mounting bracket - 5 -.
- Bolt - 13 - must not be threaded in without lock cylinder housing installed. Lock mechanism ring may fall into door.