Drive For Backrest Adjustment For 8-Way Seat, Removing

Drive For Backrest Adjustment For 8-way Seat, Removing

- Remove seat.
- Remove belt buckle.
- Remove 8-way seat trim.
- Remove cover in lower area of backrest and roll up.







- Using a screwdriver, disconnect harness connector - 1 - in direction of arrow.
- Pry out locking washer - 2 - from shaft - 3 - using a screwdriver.
- Drive the shaft - 3 - approx. 15 cm into backrest frame using hammer and drift.
- Unscrew nut - 4 -.
- Remove drive - 5 -.