Dimmer Switch: Service and Repair

Instrument Panel Light Dimmer Switch -E20-, Removing And Installing

Removing

CAUTION:
- Switch off all electrical consumers.
- Switch off ignition and remove ignition key.

- Remove driver's side lower instrument panel trim.
- Disconnect electrical connection.







- Depress locking tabs -arrows- to release switch.
- Pull switch -A- through instrument panel frame from behind and remove.

Installing
- Install switch from behind instrument panel frame and line up with guide piece.
- Clip switch into place until locking tabs engage.
- Reconnect electrical connection.
- Reinstall instrument panel trim.