DTC Memory, Erasing

Erase DTC Memory

NOTE: The vehicle system tester V.A.G 1552 can be used instead of the V.A.G 1551 Scan Tool, however a print-out is not possible.

- Connecting Scan Tool. Scan Tool Connecting
- Initiating On Board Diagnostic (OBD). On-Board Diagnostics (OBD) For Seat Adjustment, Initiating

Test requirements:
- Malfunctions are repaired
- Functional check has been carried out
- DTC memory checked again

Indicated on display

Rapid data transfer HELP
Select function XX

- Press buttons -0- and -5- (the function "Erase DTC Memory" is entered with 05).

Indicated on display

Rapid data transfer Q
05 - Erase DTC Memory

- Confirm with -Q- button.

Indicated on display

Rapid data transfer ->
DTC Memory is erased!

- Press -> button.

Indicated on display

Rapid data transfer HELP
Select function XX

NOTE:
- If this appears in the display, the test sequence is inoperative.
- Adhere strictly to test sequence; first check DTC memory, then erase memory.

- Press buttons -0- and -6- to end the output.

Indicated on display

Rapid data transfer Q
06 - End output

- Confirm with -Q- button.

Indicated on display

Rapid data transfer HELP
Enter address word XX

- Switch off ignition.
- Disconnect connector to V.A.G 1551 Scan Tool.