Camshaft Adjustment, Servicing

Camshaft Adjustment, Servicing







NOTE:
- Cylinder bank 1 is located in direction of travel, right.
- Cylinder bank 2 is located in direction of travel, left.

1. Double bearing cap
2. 10 Nm
3. Exhaust camshaft bearing cap
4. Exhaust camshaft
5. Cap
- replace
6. Intake camshaft bearing cap
7. Intake camshaft
8. Drive chain
- Mark direction of travel (installation position) before removing
9. Camshaft adjuster
- Check valves for camshaft adjustment
10. 10 Nm
11. Valve for camshaft adjustment
- replace only together with camshaft adjuster
Cylinder bank 1:
- Valve 1 for camshaft adjustment -N205-*
Cylinder bank 2:
- Valve 2 for camshaft adjustment -N208-*
12. Gasket
- Rubber/metal seal
- replace
13. Gasket
- replace
14. Cylinder head