Headlamp Switch: Service and Repair

Light Switch -E1-, Removing And Installing

NOTE: Fog Light Switch -�23- (where applicable) and Light Switch Light -L9- are integrated into Light Switch -E1- and cannot be serviced or removed separately. Should malfunctions occur, replace entire light switch.

Removing

CAUTION:
- Switch off all electrical consumers.
- Switch off ignition and remove ignition key.

- Turn rotary switch to "0" position.







- Push switch inwards -arrow 1- and turn slightly to right -arrow 2-
- Maintain switch position and pull from opening -arrow 3-
- Disconnect electrical connection.

Installing
- Connect electrical connection to switch.







- Hold switch housing firmly, push rotary switch inwards -arrow 1- and turn slightly to right -arrow 2-
- Maintain switch position and insert into instrument panel opening -3-.
- Return rotary switch to "0" position to engage.