Camshaft Bearing

Camshaft Bearing Cap





Install bearing caps - 2 - and - 4 - for both camshafts according to markings.
Fasten caps alternating diagonally and then tighten them to 10 Nm (pay attention to alignment pins).

Install both bearing caps - 1 - on chain sprockets of intake and exhaust camshafts.





Both markings on camshafts must be aligned with both arrows on bearing caps - arrows -.





Install bearing caps - 0 -, - 3 - and - 5 - and tighten to 10 Nm (pay attention to alignment pins).