Inside Door Handle Illumination

Front Door Lamps and Switches


Inside Door Handle Illumination

CAUTION!
When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool (plastic wedge, screwdriver) will be positioned using commercially available adhesive tape.

• Removal and installation of Driver Inside Door Handle Illumination (L146), Front Passenger Inside Door Handle Illumination (L147), Left Rear Inside Door Handle Illumination (L133) and Right Rear Inside Door Handle Illumination (L134) is performed in the same way and is only described for one lamp.

Removing

- Switch off ignition, switch off all electrical consumers and remove ignition key.

- Remove door trim.

Removal at driver door:.

Removal at front passenger door:.

- Release and disconnect the connector - arrow -.





- Disengage retaining tabs - arrows - and remove LED with diffusion lens.





- Turn and pull LED - 1 - out of diffusion lens - 2 -.





Installing

Install in reverse order of removal.