Sunroof With Glass Panel Overview

Sunroof with Glass Panel


Sunroof Glass Panel, Height Adjustment

Sunroof neutral position OK.

- Tilt the glass panel open.

- Slide sun shade rearward.

- Unclip the boot from the lower strip beginning at the rear.





- Then unclip the boot from upper strip beginning at the front.

- Push the boot back - arrow - out of the oblong hole and remove it.

- Move the glass panel to the neutral position.

- To prevent wind noise, adjust the front and rear height of the glass panel as shown in the illustrations.

Front panel adjustment:





- a - = 0 to 1 mm lower than the roof

- Arrow - = Direction of travel (forward)

Rear panel adjustment:





- b - = 0 to 1 mm higher than roof

- Arrow - = Direction of travel (forward)

- Tighten glass panel bolts to 4.5 Nm.