Front Seat Longitudinal Adjustment
Front Seats
Front Seat Longitudinal Adjustment
• Removal and installation is described for the left-hand side of the vehicle. Removal and installation for the right-hand side is performed in the same manner.
Removing
- Remove belt anchor --> [ Belt Anchor ] Belt Anchor
- Position seat as far up as possible using height adjustment.
- Remove 12-way seat --> [ Front Seat ] Front Seat
- Mount the fixture for seat repair (VAS 6136) on the engine and transmission holder (VAS 6095).
- Secure 12-way seat on fixture for seat repair (VAS 6136).
- Remove front seat trim --> [ Front Seat Trim ] Front Seat Trim
- Remove belt buckle --> [ Front Belt Buckle ] Front Belt Buckle
- Remove front seat control module --> [ Front Seat Control Module ]. Front Seat Control Module
- Remove screws - 3 - and - 5 - and unclip control module bracket - 2 - from seat frame.
- Loosen all wiring harnesses from seat frame.
- Disconnect connectors on seat height adjustment positioning motor - 4 -, seat longitudinal adjustment positioning motor - 6 - and seat inclination adjustment positioning motor - 7 -.
- Remove bolt - 1 - (20 Nm).
- Remove screw - 1 - (28 Nm) on right side of seat.
- Remove screw - 2 - (26,5 Nm) on right side of seat.
- Remove screw - 5 - (26.5 Nm) on left side of seat.
- Remove nut - 4 - (28 Nm).
CAUTION!
After removing pins - 3 -, seat can lower to lowest position. Clamping risk!
- Press pins - 3 - inward out of seat frame.
- Remove seat from seat longitudinal adjuster.
Installing
- Perform the steps used for removal in reverse order.