From 06.07

Secondary Air Injection System Assembly Overview





1 Non return valve

2 Vacuum hose

3 Bolt, 9 Nm

4 Vacuum tube

5 To the vacuum reservoir

6 Bolt, 9 Nm

7 Secondary Air Injection (AIR) solenoid valve 2 (N320)

8 Secondary Air Injection (AIR) solenoid valve (N112)

9 Bolt, 9 Nm

10 Vacuum line

11 Vacuum line

12 Gasket

• Replace

13 Securing clip

14 Secondary Air Injection (AIR) combination valve

• Cylinder bank 2 (left).

• Checking, refer to --> [ Secondary Air Injection Combination Valve, Checking ] Testing and Inspection.

• Removing and installing, refer to --> [ Secondary Air Injection Combination Valve ] Service and Repair.

15 Bolt, 9 Nm

16 Bolt, 9 Nm

17 For the vacuum reservoir

18 Vacuum line

19 Securing clip

20 To the Secondary Air Injection (AIR) solenoid valves

21 Air guide hose

• Between the combination valves.

22 Secondary Air Injection (AIR) sensor 1 (G609)

23 Pressure pipe

24 Bolt, 9 Nm

25 Gasket

• Replace

26 Secondary Air Injection (AIR) combination valve

• Cylinder bank 1 (right).

• Checking, refer to --> [ Secondary Air Injection Combination Valve, Checking ] Testing and Inspection.

• Removing and installing, refer to --> [ Secondary Air Injection Combination Valve ] Service and Repair.

27 Nut, 9 Nm

28 Bolt, 9 Nm

29 Bushing

30 Damping ring

31 Bracket

• For AIR pump motor (V101).

32 Secondary Air Injection (AIR) pump motor (V101)

• At front right in wheel housing below the longitudinal member.

• Removing and installing, refer to --> [ Secondary Air Injection Pump ] Service and Repair.

33 Suction hose

34 To the Secondary Air Injection (AIR) air filter

35 To intake manifold

Component Location for AIR Pump Relay (J299)





• In the E-box in plenum chamber.

• Secondary air injection pump relay (J299) - 1 - is inserted in socket "A4".