Passive Occupant Detection System Assembly Overview

Passive Occupant Detection System Assembly Overview

Seat occupied recognition controls automatic passenger airbag deactivation.

This equipment is only installed on vehicles released in the USA.





1 Seat frame

2 Passive Occupant Detection System Mat

• Must not be removed from pressure hose --> [ (Item 5) Pressure hose ] and upholstery of front seat cushion --> [ (Item 3) Upholstery of front seat cushion ]

3 Upholstery of front seat cushion

• Must not be separated from seat occupied recognition mat --> [ (Item 2) Passive Occupant Detection System Mat ].

4 Insertion profile

• Note location

5 Pressure hose

6 Seat Occupied Recognition Control Module (J706)

7 Front seat wiring harness

8 Seat Occupied Recognition Pressure Sensor (G452)