Hot Air Gun VAS 1978/14

Hot Air Gun VAS 1978/14





CAUTION!
When heat-shrinking crimp connections, be careful not to damage any other wiring, plastic parts or insulating material with the hot nozzle of the hot air gun.

Always observe operating instructions of heat gun.

Hot Air Gun, 220 V/ 50 Hz (VAS 1978/14) is used in conjunction with Shrink Tip For Hot Air Gun (VAS 1978/15) to heat-shrink the crimp connections. After crimping, crimp connections must be heat-shrunk using hot air gun to prevent moisture penetration.



Hot Air Gun, 220 V/ 50 Hz (VAS 1978/14) is a component of Wiring Harness Repair Kit (VAS 1978) and of Wiring Harness Repair Set (VAS 1978A).

Heat-shrinking crimp connections using Hot Air Gun, 220 V/ 50 Hz (VAS 1978/14).