Transmission, Installing

Transmission, Installing

Installation is basically the reverse order of removal.

- Check adjustment of selector lever cable and adjust if necessary. Refer to --> [ Selector Lever Cable Checking and Adjusting ] Procedures.

After installation, check the Automatic Transmission Fluid (ATF) level, if necessary top off. Refer to --> [ ATF Level Checking and Filling ] ATF Level Checking and Filling.

Check the vehicle alignment.Alignment

Tightening specifications, vehicles with V6 gasoline engine. Refer to --> [ Engine/Transmission Bolt Tightening
Specifications (V6 Gas Engine) ] Tightening Specifications.

Tightening specifications, vehicles with V8 FSI gasoline engine (FSI). Refer to --> [ Engine/Transmission Bolt Tightening
Specifications (V8 FSI Engine) ] Tightening Specifications.

Tightening specifications, vehicles with V8 gasoline engine (TSI). Refer to --> [ Engine/Transmission Bolt Tightening
Specifications (V8 (TSI) Turbo Gas Engine) ] Tightening Specifications.

Tightening specifications, vehicles with V6 TDI. Refer to --> [ Engine/Transmission Bolt Tightening Specifications (V6 TDI) ] Tightening Specifications.

Tightening specifications, vehicles with V10 TDI. Refer to --> [ Engine/Transmission Bolt Tightening Specifications (V10 TDI) ] Tightening Specifications.