Operation CHARM: Car repair manuals for everyone.

Diagram 113/4 (Tracks 29-42)






IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Driver's Seat Lumbar Support Adjustment Switch, Front Passenger's Seat Lumbar Support Adjustment Switch





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E176 - Driver's Seat Lumbar Support Adjustment Switch

E177 - Front Passenger's Seat Lumbar Support Adjustment Switch

J519 - Vehicle Electrical System Control Module

T4s - 4-Pin Connector, below front passenger's seat

T6ah - 6-Pin Connector

T6ai - 6-Pin Connector

T8k - 8-Pin Connector, below driver's seat

T10a - 10-Pin Connector, below driver's seat

T10b - 10-Pin Connector, below front passenger's seat

V125 - Driver's Seat Lumbar Support Curvature Adjustment Motor

V126 - Front Passenger's Seat Lumbar Support Curvature Adjustment Motor

V129 - Driver's Seat Lumbar Support Height Adjustment Motor

V130 - Front passenger Seat Lumbar Support Height Adjustment Motor

(47) - Ground Connection (in front right footwell) Overview of Ground Connections In Interior

(78) - Ground Connection (on right lower B-pillar) Overview of Ground Connections In Interior

(95) - Ground Connection 1 (in power seat wiring harness)

(145) - Ground Connection 3 (in heated seats wiring harness)

(M9) - Connection (in seat adjustment wiring harness)

* - Only models without heated seats

** - Only models with heated seats

_ . . _ - Only with front passenger's seat lumbar support adjustment

# - From May 2006

## - Through April 2006

Previous Diagram 113/3 (Tracks 15-28)