Battery Transmitter and Receiver Unit Fuse and Wiring Harness Overview

Battery Transmitter And Receiver Unit Fuse And Wiring Harness Overview







1 - Positive connection
- Red wire with suitable connection
2 - to terminal 15a
- Connection to terminal 15a.
- Ensure wire is protected by fuse
- Fuse max. 15A
3 - Antenna Ground (GND)
- Ensure correct Ground (GND) connection to body
- Antenna location must be treated with suitable corrosion protection
4 - Transmitting/Receiving Antenna
5 - Shielded antenna wire
- Wire with coaxial connector
6 - Telephone or two-way radio transmitter/receiver unit
7 - Wiring harness
- Voltage supply positive via read wire, 2.5 sq.mm cross section
- Voltage supply negative via brown wire, 2.5 sq.mm cross section
- necessary, wire to terminal 15a via black wire 1.5 sq.mm cross section
8 - Fuse holder
- Install next to battery
9 - To starter
10 - Battery
- Location in luggage compartment left and right behind side panels.
11 - Negative wire
12 - Body Ground (GND)